Massive Current Vacancies Available at Wire-Teks International Company Limited – (11 Positions)

Wire-Teks International Company Limited is a Nigerian based company with specialist interest in the field of Energy, Engineering, Environmental, Transportation and
Logistics Services.
The company also engages in the procurement and supply of electrical, technical, and/or products related to the above field in order to meet
the needs of our esteem clients and prospective customers both in Rivers State, Nigeria in general and West African at Large.
Backed by our expatriates, technical partners Wire-teks has actually been equipped with practical experience in the above field for more than 19 years and have made name for itself in the Nigerian power supply and electrification sector.
Wire-Teks is recruiting to fill the following positions of:

JOB /   POSITION	REQUIREMNTS
1) Site Superintendent	Qualification: Minimum of Bsc /  B.Eng in Engineering or its equivalent.
	Experience: Minimum of 10 years in Oil and Gas surface facilites as a Construcion or Project or Site Superintendent. Acquaitance with international standards: API, ASTM, ASME, IEC, BS, IEEE, IP Codes, NEC, NACE, ISO, etc. Good knowledge of HSE – HSE Management Sysytem, work permit system, risk assessment, safety talks, incident analysis etc Ability to coordinate & lead mulitiple discilinary teams of E& I, QA/QC, Civil, Piping, Mechanical, and Safety supervisors. Good knowledge of inspection & control of mechanical, piping Civil, E&I works Good knowledge of precomm & commissioning activities Ability to monitor & drive the overall progress of contractors on site to ensure Projects are completed and handed over on schedule. APPLY HERE
2) Site Supervisor -  Piping and Mechanical	Qualification: Minimum of Bsc /  B.Eng in Engineering or its equivalent.
	Experience: Minimum of 5 years in Oil and Gas surface facilites as a Piping, Mechanical, Construction or Project  Site Supervisor. Acquaitance with international standards: API, ASTM, ASME, BS, ISO. Good knowledge of QA/QC documentation and HSE -  work permit system, risk assessment, safety talks, incident analysis etc Good knowledge inspection and control dimension of structure steel, piping, equipment and supports during fabrication and installation. Ability to implement schedule, execute, project procedure and ensure that all deliverables are completed on time, comply to quality standard in accordance with project schedules Ability to supervise and control the resources of piping / structural fabrication, inspection, testing, installation and commissioning. Ability to to establish and maintain a good working relationship with the Contractor’s personnel and to provide positive input to methods and solutions for improvement APPLY HERE
3) Site Supervisor – Civil	Qualification: Minimum of Bsc /  B.Eng in Civil or Building Engineering  or its equivalent
	Experience: Minimum of 5 years in Oil and Gas environment as Site Supervisor. Good knowledge of QA/QC documentation and HSE -  work permit system, risk assessment, safety talks, incident analysis etc Implement schedule, execute, project procedure and ensure that all deliverables are completed on time, comply to quality standard in accordance with the project schedules Supervision and control / monitors of contractors’work execution to ensure compliance with scope, design, specifications, drawings, quality and planning. Ability to establish and maintain a good working relationship with the Contractor’s personnel and to provide positive input to methods and solutions for improvement APPLY HERE
4) Site Supervisor-E & I	Qualification: Minimum of Bsc /  B.Eng in Electrical Engineering Instrumentation   or its equivalent
	Experience: Minimum of 5 years in Oil and Gas surface as a Construction or Project or Site Supervisor. Good knowledge of HSE -  work permit system, risk assessment, safety talks, incident analysis etc Acquaitance with international standards: API, ASTM, ASME, IEC, BS, IEEE, IP Codes, NEC, NACE, ISO, etc. Good knowledge of QA/QC documentation and review of Engineering documentation. Ability to inspect, regulate, control and documentation and procured E & I / systems materials and equipment. APPLY HERE
5) Construction Engineer	Qualification: Minimum of Bsc /  B.Eng in Mechanical Engineering or its equivalent
	Experience: Minimum of 5 years in Oil and Gas surface facilites as a Piping, Mechanical, Construction or Project Engineer. Acquaitance with international standards: API, ASTM, ASME,  BS, ISO. Good knowledge in technical – commercial aspects of tendering and contracting Good knowledge in technical – commercial aspects of tendering and contracting Good knowledge of QA/QC documentation and HSE – work permit system, risk assessment, incident analysis etc Ability to implement schedule, execute, projectprocedure and ensure that all deliverables are completed on time and comply with quality standard in accordance with the project schedules. Experience in follow-up of material procurement and preparing construction cost estimates for projects. Ability to supervise site installation works and review all as built documents. Good knowledge of inspection and control dimension of structure steel, piping, equipment and supports during fabrication and installation. APPLY HERE
6) Civil Engineer	Qualification: Minimum of Bsc /  B.Eng in Civil Engineering or its equivalent
	Experience: Minimum of 5 years in Oil and Gas environment as a Civil Engineer. Acquaitance with international standards: ASTM, ACI, British / Euro Standards (BS/EN), AASHTO etc Good knowledge of QA/QC documentation and HSE – work permit system, risk assessment, safelty talks, incident analysis etc Good knowledge of technical & commercial dossiers for tendering and contracting. Ability to implement schedule, execute, project procedure and ensure that all deliverables are completed on time, comply to  quality standard in accordance with the project schedules. Experience in follow-up of material procurement and preparing construction cost estimates for projects. Ability to perform Civil and Structural analysis / design and technical review of Civil/ Structural deliverables. APPLY HERE
7) Material Controller	Qualification: Minimum of Bsc /  B.Eng in Civil Engineering or its equivalent
	Experience: Minimum of 5 years in Oil and Gas environment as a Material Controller. Ability to use SAP efficiently. Good knowledge of stock management system Ability to ensure that any applicable safety rules are implemented by the staff involved, especially regarding hazardous goods, and that  the equipment preservation procedures is properly and duly implemented throughout the duration of the contract
8) Senior Electrical Engineer	Qualification: Minimum of Bsc /  B.Eng in Electrical Engineering Instrumentation or its equivalent
	Experience: Minimum of 10 years in Engineering Organization in a similar design position. Good knowledge of HSE – work permit system, safelty talks, incident analysis etc, QA/QC documentation and review of Engineering documentation. Acquaitance with international standards: IEC, API, BS, IEEE, IP Codes, NEC, NACE, ISO, etc. Working knowledge of Autocad and relevant Engineering design software is an advantage. Ability to develop design / modify integrated HV and LV electrical systems Ability to prepare CFT, requisitions for electrical procurements and technical bid evaluation. APPLY HERE
9) Senior InstrumentationEngineer	Qualification: Minimum of Bsc /  B.Eng in Electrical Engineering Instrumentation or its equivalent
	Experience: Minimum of 10 years in an Engineering Organization in a similar design position. Good knowledge of HSE – work permit system, safelty talks, incident analysis etc, QA/QC documentation and review of Engineering documentation. Acquaitance with international standards: IEC, API, BS, IEEE, IP Codes, NEC, NACE, ISO, etc. Working knowledge of Autocad and relevant Engineering design software is an advantage. Ability to develop design / modify integrated HV and LV electrical systems Ability to develop design of integrated instrumentation systems inbcluding Process Control and Shutdown systems. APPLY HERE
10) Contract Engineer	Qualification: Minimum of Bsc /  B.Eng in Science or Engineering or a degree in business
	Experience: Minimum of 5 years in a Multinational company as a contract Engineer Good knowledge of tender – contract planning & preparation, contract strategy and commercial analysis APPLY HERE
11) Advert Executives	Qualification: Minimum of Bsc /  Hnd Marketing
	Experience: Minimum of 5 years in a reputable organisation A good knowledge of Microsoft Office Suite, and interner will be a an advantage APPLY HERE